HTTP Client
- 1. Connect
- 2. Eager Initialization
- 3. Writing Data
- 4. Consuming Data
- 5. Lifecycle Callbacks
- 6. TCP-level Configuration
- 7. Connection Pool
- 8. SSL and TLS
- 9. Retry Strategies
- 10. HTTP/2
- 11. HTTP/3
- 12. Proxy Support
- 13. Metrics
- 14. Tracing
- 15. Unix Domain Sockets
- 16. Host Name Resolution
- 17. Timeout Configuration
Reactor Netty provides the easy-to-use and easy-to-configure
HttpClient
.
It hides most of the Netty functionality that is required to create an HTTP
client
and adds Reactive Streams backpressure.
1. Connect
To connect the HTTP
client to a given HTTP
endpoint, you must create and configure a
HttpClient
instance.
By default, the host is configured for localhost
and the port is 80
.
The following example shows how to do so:
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client = HttpClient.create(); (1)
client.get() (2)
.uri("https://example.com/") (3)
.response() (4)
.block();
}
}
1 | Creates a HttpClient instance ready for configuring. |
2 | Specifies that GET method will be used. |
3 | Specifies the path. |
4 | Obtains the response HttpClientResponse |
The following example uses WebSocket
:
import io.netty.buffer.Unpooled;
import io.netty.util.CharsetUtil;
import reactor.core.publisher.Flux;
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client = HttpClient.create();
client.websocket()
.uri("wss://echo.websocket.org")
.handle((inbound, outbound) -> {
inbound.receive()
.asString()
.take(1)
.subscribe(System.out::println);
final byte[] msgBytes = "hello".getBytes(CharsetUtil.ISO_8859_1);
return outbound.send(Flux.just(Unpooled.wrappedBuffer(msgBytes), Unpooled.wrappedBuffer(msgBytes)))
.neverComplete();
})
.blockLast();
}
}
1.1. Host and Port
In order to connect to a specific host and port, you can apply the following configuration to the HTTP
client:
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.host("example.com") (1)
.port(80); (2)
client.get()
.uri("/")
.response()
.block();
}
}
1 | Configures the HTTP host |
2 | Configures the HTTP port |
The port can be specified also with PORT environment variable. |
2. Eager Initialization
By default, the initialization of the HttpClient
resources happens on demand. This means that the first
request
absorbs the extra time needed to initialize and load:
-
the event loop group
-
the host name resolver
-
the native transport libraries (when native transport is used)
-
the native libraries for the security (in case of
OpenSsl
)
When you need to preload these resources, you can configure the HttpClient
as follows:
import reactor.core.publisher.Mono;
import reactor.netty.ByteBufFlux;
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client = HttpClient.create();
client.warmup() (1)
.block();
client.post()
.uri("https://example.com/")
.send(ByteBufFlux.fromString(Mono.just("hello")))
.response()
.block(); (2)
}
}
1 | Initialize and load the event loop group, the host name resolver, the native transport libraries and the native libraries for the security |
2 | Host name resolution happens with the first request. In this example, a connection pool is used, so with the first request the connection to the URL is established, the subsequent requests to the same URL reuse the connections from the pool. |
3. Writing Data
To send data to a given HTTP
endpoint, you can provide a Publisher
by using the
send(Publisher)
method.
By default, Transfer-Encoding: chunked
is applied for those HTTP
methods for which
a request body is expected. Content-Length
provided through request headers disables Transfer-Encoding: chunked
,
if necessary. The following example sends hello
:
import reactor.core.publisher.Mono;
import reactor.netty.ByteBufFlux;
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client = HttpClient.create();
client.post()
.uri("https://example.com/")
.send(ByteBufFlux.fromString(Mono.just("hello"))) (1)
.response()
.block();
}
}
1 | Sends a hello string to the given HTTP endpoint |
3.1. Adding Headers and Other Metadata
When sending data to a given HTTP
endpoint, you may need to send additional headers, cookies and other metadata.
You can use the following configuration to do so:
import io.netty.handler.codec.http.HttpHeaderNames;
import reactor.core.publisher.Mono;
import reactor.netty.ByteBufFlux;
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.headers(h -> h.set(HttpHeaderNames.CONTENT_LENGTH, 5)); (1)
client.post()
.uri("https://example.com/")
.send(ByteBufFlux.fromString(Mono.just("hello")))
.response()
.block();
}
}
1 | Disables Transfer-Encoding: chunked and provides Content-Length header. |
3.1.1. Compression
You can enable compression on the HTTP
client, which means the request header
Accept-Encoding
is added to the request headers. The following example shows how to do so:
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.compress(true);
client.get()
.uri("https://example.com/")
.response()
.block();
}
}
3.1.2. Auto-Redirect Support
You can configure the HTTP
client to enable auto-redirect support.
Reactor Netty provides two different strategies for auto-redirect support:
-
followRedirect(boolean)
: Specifies whether HTTP auto-redirect support is enabled for statuses301|302|303|307|308
. When it is303
status code,GET
method is used for the redirect. -
followRedirect(BiPredicate<HttpClientRequest, HttpClientResponse>)
: Enables auto-redirect support if the supplied predicate matches.
The following example uses followRedirect(true)
:
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.followRedirect(true);
client.get()
.uri("https://example.com/")
.response()
.block();
}
}
4. Consuming Data
To receive data from a given HTTP
endpoint, you can use one of the methods from
HttpClient.ResponseReceiver
.
The following example uses the responseContent
method:
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client = HttpClient.create();
client.get()
.uri("https://example.com/")
.responseContent() (1)
.aggregate() (2)
.asString() (3)
.block();
}
}
1 | Receives data from a given HTTP endpoint |
2 | Aggregates the data |
3 | Transforms the data as string |
4.1. Reading Headers and Other Metadata
When receiving data from a given HTTP
endpoint, you can check response headers, status code, and other metadata.
You can obtain this additional metadata by using
HttpClientResponse
.
The following example shows how to do so.
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client = HttpClient.create();
client.get()
.uri("https://example.com/")
.responseSingle((resp, bytes) -> {
System.out.println(resp.status()); (1)
return bytes.asString();
})
.block();
}
}
1 | Obtains the status code. |
4.2. HTTP Response Decoder
By default, Netty
configures some restrictions for the incoming responses, such as:
-
The maximum length of the initial line.
-
The maximum length of all headers.
-
The maximum length of the content or each chunk.
For more information, see HttpResponseDecoder
By default, the HTTP
client is configured with the following settings:
public static final int DEFAULT_MAX_INITIAL_LINE_LENGTH = 4096;
public static final int DEFAULT_MAX_HEADER_SIZE = 8192;
/**
* Default max chunk size.
*
* @deprecated as of 1.1.0. This will be removed in 2.0.0 as Netty 5 does not support this configuration.
*/
@Deprecated
public static final int DEFAULT_MAX_CHUNK_SIZE = 8192;
public static final boolean DEFAULT_VALIDATE_HEADERS = true;
public static final int DEFAULT_INITIAL_BUFFER_SIZE = 128;
public static final boolean DEFAULT_ALLOW_DUPLICATE_CONTENT_LENGTHS = false;
public static final boolean DEFAULT_ALLOW_PARTIAL_CHUNKS = true;
public static final boolean DEFAULT_FAIL_ON_MISSING_RESPONSE = false;
public static final boolean DEFAULT_PARSE_HTTP_AFTER_CONNECT_REQUEST = false;
/**
* The maximum length of the content of the HTTP/2.0 clear-text upgrade request.
* By default, the client will allow an upgrade request with up to 65536 as
* the maximum length of the aggregated content.
*/
public static final int DEFAULT_H2C_MAX_CONTENT_LENGTH = 65536;
When you need to change these default settings, you can configure the HTTP
client as follows:
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.httpResponseDecoder(spec -> spec.maxHeaderSize(16384)); (1)
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
}
}
1 | The maximum length of all headers will be 16384 .
When this value is exceeded, a
TooLongFrameException
is raised. |
5. Lifecycle Callbacks
The following lifecycle callbacks are provided to let you extend the HttpClient
.
Callback | Description |
---|---|
|
Invoked when the request has been sent. |
|
Invoked after the remote address has been resolved successfully. |
|
Invoked after the response has been fully received. |
|
Invoked when initializing the channel. |
|
Invoked when the channel is about to connect. |
|
Invoked after the channel has been connected. |
|
Invoked after the channel has been disconnected. |
|
Invoked when the request has not been sent and when the response has not been fully received. |
|
Invoked when the response headers have been received, and the request is about to be redirected. |
|
Invoked when the request is about to be sent. |
|
Invoked when the request has not been sent. |
|
Invoked when the remote address is about to be resolved. |
|
Invoked in case the remote address hasn’t been resolved successfully. |
|
Invoked after the response headers have been received. |
|
Invoked when the response has not been fully received. |
The following example uses the doOnConnected
and doOnChannelInit
callbacks:
import io.netty.handler.logging.LoggingHandler;
import io.netty.handler.timeout.ReadTimeoutHandler;
import reactor.netty.http.client.HttpClient;
import java.util.concurrent.TimeUnit;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.doOnConnected(conn ->
conn.addHandlerFirst(new ReadTimeoutHandler(10, TimeUnit.SECONDS))) (1)
.doOnChannelInit((observer, channel, remoteAddress) ->
channel.pipeline()
.addFirst(new LoggingHandler("reactor.netty.examples"))); (2)
client.get()
.uri("https://example.com/")
.response()
.block();
}
}
1 | Netty pipeline is extended with ReadTimeoutHandler when the channel has been connected. |
2 | Netty pipeline is extended with LoggingHandler when initializing the channel. |
6. TCP-level Configuration
When you need configurations on a TCP level, you can use the following snippet
to extend the default TCP
client configuration (add an option, bind address etc.):
import io.netty.channel.ChannelOption;
import io.netty.channel.epoll.EpollChannelOption;
//import io.netty.channel.socket.nio.NioChannelOption;
//import jdk.net.ExtendedSocketOptions;
import reactor.netty.http.client.HttpClient;
import java.net.InetSocketAddress;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.bindAddress(() -> new InetSocketAddress("host", 1234))
.option(ChannelOption.CONNECT_TIMEOUT_MILLIS, 10000) (1)
.option(ChannelOption.SO_KEEPALIVE, true) (2)
// The options below are available only when NIO transport (Java 11) is used
// on Mac or Linux (Java does not currently support these extended options on Windows)
// https://bugs.openjdk.java.net/browse/JDK-8194298
//.option(NioChannelOption.of(ExtendedSocketOptions.TCP_KEEPIDLE), 300)
//.option(NioChannelOption.of(ExtendedSocketOptions.TCP_KEEPINTERVAL), 60)
//.option(NioChannelOption.of(ExtendedSocketOptions.TCP_KEEPCOUNT), 8);
// The options below are available only when Epoll transport is used
.option(EpollChannelOption.TCP_KEEPIDLE, 300) (3)
.option(EpollChannelOption.TCP_KEEPINTVL, 60) (4)
.option(EpollChannelOption.TCP_KEEPCNT, 8); (5)
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
}
}
1 | Configures the connection establishment timeout to 10 seconds. |
2 | Enables TCP keepalive . This means that TCP starts sending keepalive probes when a connection is idle for some time. |
3 | The connection needs to remain idle for 5 minutes before TCP starts sending keepalive probes. |
4 | Configures the time between individual keepalive probes to 1 minute. |
5 | Configures the maximum number of TCP keepalive probes to 8. |
See TCP Client for more about TCP
level configurations.
6.1. Wire Logger
Reactor Netty provides wire logging for when the traffic between the peers needs to be inspected.
By default, wire logging is disabled.
To enable it, you must set the logger reactor.netty.http.client.HttpClient
level to DEBUG
and apply the following configuration:
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.wiretap(true); (1)
client.get()
.uri("https://example.com/")
.response()
.block();
}
}
1 | Enables the wire logging |
6.1.1. Wire Logger formatters
Reactor Netty supports 3 different formatters:
-
AdvancedByteBufFormat#HEX_DUMP - the default
/**
* When wire logging is enabled with this format, both events and content will be logged.
* The content will be in hex format.
* <p>Examples:</p>
* <pre>
* {@code
* reactor.netty.http.HttpTests - [d5230a14, L:/0:0:0:0:0:0:0:1:60267 - R:/0:0:0:0:0:0:0:1:60269] REGISTERED
* reactor.netty.http.HttpTests - [d5230a14, L:/0:0:0:0:0:0:0:1:60267 - R:/0:0:0:0:0:0:0:1:60269] ACTIVE
* reactor.netty.http.HttpTests - [d5230a14, L:/0:0:0:0:0:0:0:1:60267 - R:/0:0:0:0:0:0:0:1:60269] READ: 145B
* +-------------------------------------------------+
* | 0 1 2 3 4 5 6 7 8 9 a b c d e f |
* +--------+-------------------------------------------------+----------------+
* |00000000| 50 4f 53 54 20 2f 74 65 73 74 2f 57 6f 72 6c 64 |POST /test/World|
* |00000010| 20 48 54 54 50 2f 31 2e 31 0d 0a 43 6f 6e 74 65 | HTTP/1.1..Conte|
* |00000020| 6e 74 2d 54 79 70 65 3a 20 74 65 78 74 2f 70 6c |nt-Type: text/pl|
* |00000030| 61 69 6e 0d 0a 75 73 65 72 2d 61 67 65 6e 74 3a |ain..user-agent:|
* |00000040| 20 52 65 61 63 74 6f 72 4e 65 74 74 79 2f 64 65 | ReactorNetty/de|
* ...
* reactor.netty.http.HttpTests - [d5230a14, L:/0:0:0:0:0:0:0:1:60267 - R:/0:0:0:0:0:0:0:1:60269] WRITE: 38B
* +-------------------------------------------------+
* | 0 1 2 3 4 5 6 7 8 9 a b c d e f |
* +--------+-------------------------------------------------+----------------+
* |00000000| 48 54 54 50 2f 31 2e 31 20 32 30 30 20 4f 4b 0d |HTTP/1.1 200 OK.|
* |00000010| 0a 63 6f 6e 74 65 6e 74 2d 6c 65 6e 67 74 68 3a |.content-length:|
* |00000020| 20 30 0d 0a 0d 0a | 0.... |
* +--------+-------------------------------------------------+----------------+
* }
* </pre>
*/
/**
* When wire logging is enabled with this format, only the events will be logged.
* <p>Examples:</p>
* <pre>
* {@code
* reactor.netty.http.HttpTests - [230d3686, L:/0:0:0:0:0:0:0:1:60241 - R:/0:0:0:0:0:0:0:1:60245] REGISTERED
* reactor.netty.http.HttpTests - [230d3686, L:/0:0:0:0:0:0:0:1:60241 - R:/0:0:0:0:0:0:0:1:60245] ACTIVE
* reactor.netty.http.HttpTests - [230d3686, L:/0:0:0:0:0:0:0:1:60241 - R:/0:0:0:0:0:0:0:1:60245] READ: 145B
* reactor.netty.http.HttpTests - [230d3686, L:/0:0:0:0:0:0:0:1:60241 - R:/0:0:0:0:0:0:0:1:60245] WRITE: 38B
* }
* </pre>
*/
/**
* When wire logging is enabled with this format, both events and content will be logged.
* The content will be in plain text format.
* <p>Examples:</p>
* <pre>
* {@code
* reactor.netty.http.HttpTests - [02c3db6c, L:/0:0:0:0:0:0:0:1:60317 - R:/0:0:0:0:0:0:0:1:60319] REGISTERED
* reactor.netty.http.HttpTests - [02c3db6c, L:/0:0:0:0:0:0:0:1:60317 - R:/0:0:0:0:0:0:0:1:60319] ACTIVE
* reactor.netty.http.HttpTests - [02c3db6c, L:/0:0:0:0:0:0:0:1:60317 - R:/0:0:0:0:0:0:0:1:60319] READ: 145B POST /test/World HTTP/1.1
* Content-Type: text/plain
* user-agent: ReactorNetty/dev
* ...
* reactor.netty.http.HttpTests - [02c3db6c, L:/0:0:0:0:0:0:0:1:60317 - R:/0:0:0:0:0:0:0:1:60319] WRITE: 38B HTTP/1.1 200 OK
* content-length: 0
* }
* </pre>
*/
When you need to change the default formatter you can configure it as follows:
import io.netty.handler.logging.LogLevel;
import reactor.netty.http.client.HttpClient;
import reactor.netty.transport.logging.AdvancedByteBufFormat;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.wiretap("logger-name", LogLevel.DEBUG, AdvancedByteBufFormat.TEXTUAL); (1)
client.get()
.uri("https://example.com/")
.response()
.block();
}
}
1 | Enables the wire logging, AdvancedByteBufFormat#TEXTUAL is used for printing the content. |
6.2. Event Loop Group
By default Reactor Netty
uses an “Event Loop Group”, where the number of the worker threads equals the number of
processors available to the runtime on initialization (but with a minimum value of 4). This “Event Loop Group” is shared between all servers and clients in one JVM.
When you need a different configuration, you can use one of the LoopResources
#create
methods.
The following listing shows the default configuration for the Event Loop Group:
/**
* Default worker thread count, fallback to available processor
* (but with a minimum value of 4).
*/
public static final String IO_WORKER_COUNT = "reactor.netty.ioWorkerCount";
/**
* Default selector thread count, fallback to -1 (no selector thread)
* <p><strong>Note:</strong> In most use cases using a worker thread also as a selector thread works well.
* A possible use case for specifying a separate selector thread might be when the worker threads are too busy
* and connections cannot be accepted fast enough.
* <p><strong>Note:</strong> Although more than 1 can be configured as a selector thread count, in reality
* only 1 thread will be used as a selector thread.
*/
public static final String IO_SELECT_COUNT = "reactor.netty.ioSelectCount";
/**
* Default worker thread count for UDP, fallback to available processor
* (but with a minimum value of 4).
*/
public static final String UDP_IO_THREAD_COUNT = "reactor.netty.udp.ioThreadCount";
/**
* Default quiet period that guarantees that the disposal of the underlying LoopResources
* will not happen, fallback to 2 seconds.
*/
public static final String SHUTDOWN_QUIET_PERIOD = "reactor.netty.ioShutdownQuietPeriod";
/**
* Default maximum amount of time to wait until the disposal of the underlying LoopResources
* regardless if a task was submitted during the quiet period, fallback to 15 seconds.
*/
public static final String SHUTDOWN_TIMEOUT = "reactor.netty.ioShutdownTimeout";
/**
* Default value whether the native transport (epoll, kqueue) will be preferred,
* fallback it will be preferred when available.
*/
If you need changes to these settings, you can apply the following configuration:
import reactor.netty.http.client.HttpClient;
import reactor.netty.resources.LoopResources;
public class Application {
public static void main(String[] args) {
LoopResources loop = LoopResources.create("event-loop", 1, 4, true);
HttpClient client =
HttpClient.create()
.runOn(loop);
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
}
}
6.2.1. Disposing Event Loop Group
-
If you use the default
Event Loop Group
provided by Reactor Netty, invokeHttpResources
#disposeLoopsAndConnections
/#disposeLoopsAndConnectionsLater
method.
Disposing HttpResources means that every server/client that is using it, will not be able to use it anymore!
|
-
If you use custom
LoopResources
, invokeLoopResources
#dispose
/#disposeLater
method.
Disposing the custom LoopResources means that every server/client that is configured to use it, will not be able to use it anymore!
|
7. Connection Pool
By default, HttpClient
(HttpClient.create()
) uses a shared ConnectionProvider
. This ConnectionProvider
is configured to create
a “fixed” connection pool per remote host (a remote host implies the combination of a hostname and its associated port number) with:
-
500
as the maximum number of active channels -
1000
as the maximum number of further channel acquisition attempts allowed to be kept in a pending state -
The rest of the configurations are the defaults (check the system properties or the builder configurations below)
This means that the implementation creates a new channel if someone tries to acquire a channel
as long as less than 500
have been created and are managed by the pool.
When the maximum number of channels in the pool is reached, up to 1000
new attempts to
acquire a channel are delayed (pending) until a channel is returned to the pool again,
and further attempts are declined with an error.
/**
* Default max connections. Fallback to
* 2 * available number of processors (but with a minimum value of 16)
*/
public static final String POOL_MAX_CONNECTIONS = "reactor.netty.pool.maxConnections";
/**
* Default acquisition timeout (milliseconds) before error. If -1 will never wait to
* acquire before opening a new
* connection in an unbounded fashion. Fallback 45 seconds
*/
public static final String POOL_ACQUIRE_TIMEOUT = "reactor.netty.pool.acquireTimeout";
/**
* Default max idle time, fallback - max idle time is not specified.
* <p><strong>Note:</strong> This configuration is not applicable for {@link reactor.netty.tcp.TcpClient}.
* A TCP connection is always closed and never returned to the pool.
*/
public static final String POOL_MAX_IDLE_TIME = "reactor.netty.pool.maxIdleTime";
/**
* Default max life time, fallback - max life time is not specified.
* <p><strong>Note:</strong> This configuration is not applicable for {@link reactor.netty.tcp.TcpClient}.
* A TCP connection is always closed and never returned to the pool.
*/
public static final String POOL_MAX_LIFE_TIME = "reactor.netty.pool.maxLifeTime";
/**
* Default leasing strategy (fifo, lifo), fallback to fifo.
* <ul>
* <li>fifo - The connection selection is first in, first out</li>
* <li>lifo - The connection selection is last in, first out</li>
* </ul>
* <p><strong>Note:</strong> This configuration is not applicable for {@link reactor.netty.tcp.TcpClient}.
* A TCP connection is always closed and never returned to the pool.
*/
public static final String POOL_LEASING_STRATEGY = "reactor.netty.pool.leasingStrategy";
/**
* Default {@code getPermitsSamplingRate} (between 0d and 1d (percentage))
* to be used with a {@link SamplingAllocationStrategy}.
* This strategy wraps a {@link PoolBuilder#sizeBetween(int, int) sizeBetween} {@link AllocationStrategy}
* and samples calls to {@link AllocationStrategy#getPermits(int)}.
* Fallback - sampling is not enabled.
*/
public static final String POOL_GET_PERMITS_SAMPLING_RATE = "reactor.netty.pool.getPermitsSamplingRate";
/**
* Default {@code returnPermitsSamplingRate} (between 0d and 1d (percentage))
* to be used with a {@link SamplingAllocationStrategy}.
* This strategy wraps a {@link PoolBuilder#sizeBetween(int, int) sizeBetween} {@link AllocationStrategy}
* and samples calls to {@link AllocationStrategy#returnPermits(int)}.
* Fallback - sampling is not enabled.
*/
When you need to change the default settings, you can configure the ConnectionProvider
as follows:
import reactor.netty.http.client.HttpClient;
import reactor.netty.resources.ConnectionProvider;
import java.time.Duration;
public class Application {
public static void main(String[] args) {
ConnectionProvider provider =
ConnectionProvider.builder("custom")
.maxConnections(50)
.maxIdleTime(Duration.ofSeconds(20)) (1)
.maxLifeTime(Duration.ofSeconds(60)) (2)
.pendingAcquireTimeout(Duration.ofSeconds(60)) (3)
.evictInBackground(Duration.ofSeconds(120)) (4)
.build();
HttpClient client = HttpClient.create(provider);
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
provider.disposeLater()
.block();
}
}
1 | Configures the maximum time for a connection to stay idle to 20 seconds. |
2 | Configures the maximum time for a connection to stay alive to 60 seconds. |
3 | Configures the maximum time for the pending acquire operation to 60 seconds. |
4 | Every two minutes, the connection pool is regularly checked for connections that are applicable for removal. |
Notice that only the default HttpClient (HttpClient.create() ) uses 500 as the maximum number of active channels. In the example above, when
instantiating a custom ConnectionProvider , we are changing this value to 50 using maxConnections . Also, if you don’t set this parameter the
default maxConnections is used (2 * available number of processors).
|
The following listing shows the available configurations:
Configuration name | Description |
---|---|
|
When this option is enabled, connection pools are regularly checked in the background, and those that are empty and been inactive for a specified time become eligible for disposal. Connection pool is considered empty when there are no active connections, idle connections and pending acquisitions. By default, this background disposal of inactive pools is disabled. |
|
When |
|
When this option is enabled, each connection pool regularly checks for connections that are
eligible for removal according to eviction criteria like |
|
Configure the connection pool so that if there are idle connections (i.e. pool is under-utilized),
the next acquire operation will get the |
|
Configure the connection pool so that if there are idle connections (i.e. pool is under-utilized),
the next acquire operation will get the |
|
The maximum number of connections (per connection pool) before start pending. Default to 2 * available number of processors (but with a minimum value of 16). |
|
The time after which the channel is eligible to be closed when idle (resolution: ms). Default: max idle time is not specified. |
|
The total life time after which the channel is eligible to be closed (resolution: ms). Default: max life time is not specified. |
|
Enables/disables built-in integration with Micrometer. |
|
The maximum number of extra attempts at acquiring a connection to keep in a pending queue. If -1 is specified, the pending queue does not have upper limit. Default to 2 * max connections. |
|
The maximum time before which a pending acquire must complete, or a TimeoutException is thrown (resolution: ms). If -1 is specified, no such timeout is applied. Default: 45 seconds. |
When you expect a high load, be cautious with a connection pool with a very high value for maximum connections. You might experience
reactor.netty.http.client.PrematureCloseException exception with a root cause "Connect Timeout" due
to too many concurrent connections opened/acquired.
|
If you need to disable the connection pool, you can apply the following configuration:
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.newConnection()
.doOnConnected(conn -> System.out.println("Connection " + conn.channel()));
String response =
// A new connection is established for every request
client.get()
.uri("https://httpbin.org/get")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
response =
// A new connection is established for every request
client.post()
.uri("https://httpbin.org/post")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
}
}
7.1. Disposing Connection Pool
-
If you use the default
ConnectionProvider
provided by Reactor Netty, invokeHttpResources
#disposeLoopsAndConnections
/#disposeLoopsAndConnectionsLater
method.
Disposing HttpResources means that every client that is using it, will not be able to use it anymore!
|
-
If you use custom
ConnectionProvider
, invokeConnectionProvider
#dispose
/#disposeLater
/#disposeWhen
method.
Disposing the custom ConnectionProvider means that every client that is configured to use it, will not be able to use it anymore!
|
7.2. Metrics
The pooled ConnectionProvider
supports built-in integration with Micrometer
.
It exposes all metrics with a prefix of reactor.netty.connection.provider
.
Pooled ConnectionProvider
metrics
metric name | type | description |
---|---|---|
reactor.netty.connection.provider.total.connections |
Gauge |
The number of all connections, active or idle. See Total Connections |
reactor.netty.connection.provider.active.connections |
Gauge |
The number of the connections that have been successfully acquired and are in active use. See Active Connections |
reactor.netty.connection.provider.max.connections |
Gauge |
The maximum number of active connections that are allowed. See Max Connections |
reactor.netty.connection.provider.idle.connections |
Gauge |
The number of the idle connections. See Idle Connections |
reactor.netty.connection.provider.pending.connections |
Gauge |
The number of requests that are waiting for a connection. See Pending Connections |
reactor.netty.connection.provider.pending.connections.time |
Timer |
Time spent in pending acquire a connection from the connection pool. See Pending Connections Time |
reactor.netty.connection.provider.max.pending.connections |
Gauge |
The maximum number of requests that will be queued while waiting for a ready connection. See Max Pending Connections |
The following table provides information for the HTTP client metrics when it is configured to serve HTTP/2
traffic:
metric name | type | description |
---|---|---|
reactor.netty.connection.provider.active.streams |
Gauge |
The number of the active HTTP/2 streams. See Active Streams |
reactor.netty.connection.provider.pending.streams |
Gauge |
The number of requests that are waiting for opening HTTP/2 stream. See Pending Streams |
The following example enables that integration:
import reactor.netty.http.client.HttpClient;
import reactor.netty.resources.ConnectionProvider;
public class Application {
public static void main(String[] args) {
ConnectionProvider provider =
ConnectionProvider.builder("custom")
.maxConnections(50)
.metrics(true) (1)
.build();
HttpClient client = HttpClient.create(provider);
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
provider.disposeLater()
.block();
}
}
1 | Enables the built-in integration with Micrometer |
8. SSL and TLS
When you need SSL or TLS, you can apply the configuration shown in the next example.
By default, if OpenSSL
is available, a
SslProvider.OPENSSL
provider is used as a provider. Otherwise, a
SslProvider.JDK provider is used
You can switch the provider by using
SslContextBuilder
or by setting -Dio.netty.handler.ssl.noOpenSsl=true
.
The following example uses SslContextBuilder
:
import reactor.netty.http.Http11SslContextSpec;
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
Http11SslContextSpec http11SslContextSpec = Http11SslContextSpec.forClient();
HttpClient client =
HttpClient.create()
.secure(spec -> spec.sslContext(http11SslContextSpec));
client.get()
.uri("https://example.com/")
.response()
.block();
}
}
8.1. Server Name Indication
By default, the HTTP
client sends the remote host name as SNI
server name.
When you need to change this default setting, you can configure the HTTP
client as follows:
import io.netty.handler.ssl.SslContext;
import io.netty.handler.ssl.SslContextBuilder;
import reactor.netty.http.client.HttpClient;
import javax.net.ssl.SNIHostName;
public class Application {
public static void main(String[] args) throws Exception {
SslContext sslContext = SslContextBuilder.forClient().build();
HttpClient client =
HttpClient.create()
.secure(spec -> spec.sslContext(sslContext)
.serverNames(new SNIHostName("test.com")));
client.get()
.uri("https://127.0.0.1:8080/")
.response()
.block();
}
}
9. Retry Strategies
By default, the HTTP
client retries the request once if it was aborted on the TCP
level.
10. HTTP/2
By default, the HTTP
client supports HTTP/1.1
. If you need HTTP/2
, you can get it through configuration.
In addition to the protocol configuration, if you need H2
but not H2C (cleartext)
, you must also configure SSL.
As Application-Layer Protocol Negotiation (ALPN) is not supported “out-of-the-box” by JDK8 (although some vendors backported ALPN to JDK8), you need an additional dependency to a native library that
supports it — for example, netty-tcnative-boringssl-static .
|
The following listing presents a simple H2
example:
import io.netty.handler.codec.http.HttpHeaders;
import reactor.core.publisher.Mono;
import reactor.netty.http.HttpProtocol;
import reactor.netty.http.client.HttpClient;
import reactor.util.function.Tuple2;
public class H2Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.protocol(HttpProtocol.H2) (1)
.secure(); (2)
Tuple2<String, HttpHeaders> response =
client.get()
.uri("https://example.com/")
.responseSingle((res, bytes) -> bytes.asString()
.zipWith(Mono.just(res.responseHeaders())))
.block();
System.out.println("Used stream ID: " + response.getT2().get("x-http2-stream-id"));
System.out.println("Response: " + response.getT1());
}
}
1 | Configures the client to support only HTTP/2 |
2 | Configures SSL |
The following listing presents a simple H2C
example:
import io.netty.handler.codec.http.HttpHeaders;
import reactor.core.publisher.Mono;
import reactor.netty.http.HttpProtocol;
import reactor.netty.http.client.HttpClient;
import reactor.util.function.Tuple2;
public class H2CApplication {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.protocol(HttpProtocol.H2C);
Tuple2<String, HttpHeaders> response =
client.get()
.uri("http://localhost:8080/")
.responseSingle((res, bytes) -> bytes.asString()
.zipWith(Mono.just(res.responseHeaders())))
.block();
System.out.println("Used stream ID: " + response.getT2().get("x-http2-stream-id"));
System.out.println("Response: " + response.getT1());
}
}
10.1. Protocol Selection
* @author Stephane Maldini
*/
public enum HttpProtocol {
/**
* The default supported HTTP protocol by HttpServer and HttpClient.
*/
HTTP11,
/**
* HTTP/2.0 support with TLS
* <p>If used along with HTTP/1.1 protocol, HTTP/2.0 will be the preferred protocol.
* While negotiating the application level protocol, HTTP/2.0 or HTTP/1.1 can be chosen.
* <p>If used without HTTP/1.1 protocol, HTTP/2.0 will always be offered as a protocol
* for communication with no fallback to HTTP/1.1.
*/
H2,
/**
* HTTP/2.0 support with clear-text.
* <p>If used along with HTTP/1.1 protocol, will support H2C "upgrade":
* Request or consume requests as HTTP/1.1 first, looking for HTTP/2.0 headers
* and {@literal Connection: Upgrade}. A server will typically reply a successful
* 101 status if upgrade is successful or a fallback HTTP/1.1 response. When
* successful the client will start sending HTTP/2.0 traffic.
* <p>If used without HTTP/1.1 protocol, will support H2C "prior-knowledge": Doesn't
* require {@literal Connection: Upgrade} handshake between a client and server but
* fallback to HTTP/1.1 will not be supported.
*/
H2C,
/**
* HTTP/3.0 support.
* @since 1.2.0
*/
11. HTTP/3
By default, the HTTP
client supports HTTP/1.1
. If you need HTTP/3
, you can get it through configuration.
In addition to the protocol configuration, you need to add dependency to io.netty.incubator:netty-incubator-codec-http3
.
The following listing presents a simple HTTP3
example:
import io.netty.handler.codec.http.HttpHeaders;
import reactor.core.publisher.Mono;
import reactor.netty.http.HttpProtocol;
import reactor.netty.http.client.HttpClient;
import reactor.util.function.Tuple2;
import java.net.InetSocketAddress;
import java.time.Duration;
public class Application {
public static void main(String[] args) throws Exception {
HttpClient client =
HttpClient.create()
.remoteAddress(() -> new InetSocketAddress("www.google.com", 443))
.protocol(HttpProtocol.HTTP3) (1)
.secure() (2)
.http3Settings(spec -> spec.idleTimeout(Duration.ofSeconds(5)) (3)
.maxData(10000000)
.maxStreamDataBidirectionalLocal(1000000));
Tuple2<String, HttpHeaders> response =
client.get()
.uri("/")
.responseSingle((res, bytes) -> bytes.asString()
.zipWith(Mono.just(res.responseHeaders())))
.block();
System.out.println("Used stream ID: " + response.getT2().get("x-http3-stream-id"));
System.out.println("Response: " + response.getT1());
}
}
1 | Configures the client to support only HTTP/3 |
2 | Configures SSL |
3 | Configures HTTP/3 settings |
12. Proxy Support
Reactor Netty supports the proxy functionality provided by Netty and provides a way
to specify non proxy hosts
through the ProxyProvider
builder.
Netty’s HTTP proxy support always uses CONNECT
method in order to establish a tunnel to the specified proxy regardless of the scheme that is used http
or https
.
(More information: Netty enforce HTTP proxy to support HTTP CONNECT method).
Some proxies might not support CONNECT
method when the scheme is http
or might need to be configured in order to support this way of communication.
Sometimes this might be the reason for not being able to connect to the proxy. Consider checking the proxy documentation
whether it supports or needs an additional configuration in order to support CONNECT
method.
The following example uses ProxyProvider
:
import reactor.netty.http.client.HttpClient;
import reactor.netty.transport.ProxyProvider;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.proxy(spec -> spec.type(ProxyProvider.Proxy.HTTP)
.host("proxy")
.port(8080)
.nonProxyHosts("localhost")
.connectTimeoutMillis(20_000)); (1)
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
}
}
1 | Configures the connection establishment timeout to 20 seconds. |
13. Metrics
The HTTP client supports built-in integration with Micrometer
.
It exposes all metrics with a prefix of reactor.netty.http.client
.
The following table provides information for the HTTP client metrics:
metric name | type | description |
---|---|---|
reactor.netty.http.client.data.received |
DistributionSummary |
Amount of the data received, in bytes. See Data Received |
reactor.netty.http.client.data.sent |
DistributionSummary |
Amount of the data sent, in bytes. See Data Sent |
reactor.netty.http.client.errors |
Counter |
Number of errors that occurred. See Errors Count |
reactor.netty.http.client.tls.handshake.time |
Timer |
Time spent for TLS handshake. See Tls Handshake Time |
reactor.netty.http.client.connect.time |
Timer |
Time spent for connecting to the remote address. See Connect Time |
reactor.netty.http.client.address.resolver |
Timer |
Time spent for resolving the address. See Hostname Resolution Time |
reactor.netty.http.client.data.received.time |
Timer |
Time spent in consuming incoming data. See Http Client Data Received Time |
reactor.netty.http.client.data.sent.time |
Timer |
Time spent in sending outgoing data. See Http Client Data Sent Time |
reactor.netty.http.client.response.time |
Timer |
Total time for the request/response See Http Client Response Time |
These additional metrics are also available:
Pooled ConnectionProvider
metrics
metric name | type | description |
---|---|---|
reactor.netty.connection.provider.total.connections |
Gauge |
The number of all connections, active or idle. See Total Connections |
reactor.netty.connection.provider.active.connections |
Gauge |
The number of the connections that have been successfully acquired and are in active use. See Active Connections |
reactor.netty.connection.provider.max.connections |
Gauge |
The maximum number of active connections that are allowed. See Max Connections |
reactor.netty.connection.provider.idle.connections |
Gauge |
The number of the idle connections. See Idle Connections |
reactor.netty.connection.provider.pending.connections |
Gauge |
The number of requests that are waiting for a connection. See Pending Connections |
reactor.netty.connection.provider.pending.connections.time |
Timer |
Time spent in pending acquire a connection from the connection pool. See Pending Connections Time |
reactor.netty.connection.provider.max.pending.connections |
Gauge |
The maximum number of requests that will be queued while waiting for a ready connection. See Max Pending Connections |
The following table provides information for the HTTP client metrics when it is configured to serve HTTP/2
traffic:
metric name | type | description |
---|---|---|
reactor.netty.connection.provider.active.streams |
Gauge |
The number of the active HTTP/2 streams. See Active Streams |
reactor.netty.connection.provider.pending.streams |
Gauge |
The number of requests that are waiting for opening HTTP/2 stream. See Pending Streams |
ByteBufAllocator
metrics
metric name | type | description |
---|---|---|
reactor.netty.bytebuf.allocator.used.heap.memory |
Gauge |
The number of bytes reserved by heap buffer allocator. See Used Heap Memory |
reactor.netty.bytebuf.allocator.used.direct.memory |
Gauge |
The number of bytes reserved by direct buffer allocator. See Used Direct Memory |
reactor.netty.bytebuf.allocator.heap.arenas |
Gauge |
The number of heap arenas (when |
reactor.netty.bytebuf.allocator.direct.arenas |
Gauge |
The number of direct arenas (when |
reactor.netty.bytebuf.allocator.threadlocal.caches |
Gauge |
The number of thread local caches (when |
reactor.netty.bytebuf.allocator.small.cache.size |
Gauge |
The size of the small cache (when |
reactor.netty.bytebuf.allocator.normal.cache.size |
Gauge |
The size of the normal cache (when |
reactor.netty.bytebuf.allocator.chunk.size |
Gauge |
The chunk size for an arena (when |
reactor.netty.bytebuf.allocator.active.heap.memory |
Gauge |
The actual bytes consumed by in-use buffers allocated from heap buffer pools (when |
reactor.netty.bytebuf.allocator.active.direct.memory |
Gauge |
The actual bytes consumed by in-use buffers allocated from direct buffer pools (when |
EventLoop
metrics
metric name | type | description |
---|---|---|
reactor.netty.eventloop.pending.tasks |
Gauge |
The number of tasks that are pending for processing on an event loop. See Pending Tasks |
The following example enables that integration:
import io.micrometer.core.instrument.Metrics;
import io.micrometer.core.instrument.config.MeterFilter;
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
Metrics.globalRegistry (1)
.config()
.meterFilter(MeterFilter.maximumAllowableTags("reactor.netty.http.client", "URI", 100, MeterFilter.deny()));
HttpClient client =
HttpClient.create()
.metrics(true, s -> {
if (s.startsWith("/stream/")) { (2)
return "/stream/{n}";
}
else if (s.startsWith("/bytes/")) {
return "/bytes/{n}";
}
return s;
}); (3)
client.get()
.uri("https://httpbin.org/stream/2")
.responseContent()
.blockLast();
client.get()
.uri("https://httpbin.org/bytes/1024")
.responseContent()
.blockLast();
}
}
1 | Applies upper limit for the meters with URI tag |
2 | Templated URIs will be used as a URI tag value when possible |
3 | Enables the built-in integration with Micrometer |
In order to avoid a memory and CPU overhead of the enabled metrics, it is important to convert the real URIs to templated URIs when possible. Without a conversion to a template-like form, each distinct URI leads to the creation of a distinct tag, which takes a lot of memory for the metrics. |
Always apply an upper limit for the meters with URI tags. Configuring an upper limit on the number of meters can help in cases when the real URIs cannot be templated.
You can find more information at maximumAllowableTags .
|
When HTTP client metrics are needed for an integration with a system other than Micrometer
or you want
to provide your own integration with Micrometer
, you can provide your own metrics recorder, as follows:
import reactor.netty.http.client.HttpClient;
import reactor.netty.http.client.HttpClientMetricsRecorder;
import java.net.SocketAddress;
import java.time.Duration;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.metrics(true, CustomHttpClientMetricsRecorder::new); (1)
client.get()
.uri("https://httpbin.org/stream/2")
.response()
.block();
}
1 | Enables HTTP client metrics and provides HttpClientMetricsRecorder implementation. |
14. Tracing
The HTTP client supports built-in integration with Micrometer Tracing
.
The following table provides information for the HTTP client spans:
contextual name | description |
---|---|
HTTP <HTTP METHOD> |
Information and total time for the request. See Http Client Response Span. |
hostname resolution |
Information and time spent for resolving the address. See Hostname Resolution Span. |
connect |
Information and time spent for connecting to the remote address. See Connect Span. |
tls handshake |
Information and time spent for TLS handshake. See Tls Handshake Span. |
The following example enables that integration. This concrete example uses Brave
and reports the information to Zipkin
.
See the Micrometer Tracing
documentation for OpenTelemetry
setup.
import brave.Tracing;
import brave.propagation.StrictCurrentTraceContext;
import brave.sampler.Sampler;
import io.micrometer.tracing.CurrentTraceContext;
import io.micrometer.tracing.Tracer;
import io.micrometer.tracing.brave.bridge.BraveBaggageManager;
import io.micrometer.tracing.brave.bridge.BraveCurrentTraceContext;
import io.micrometer.tracing.brave.bridge.BravePropagator;
import io.micrometer.tracing.brave.bridge.BraveTracer;
import io.micrometer.tracing.propagation.Propagator;
import reactor.netty.http.client.HttpClient;
import reactor.netty.http.observability.ReactorNettyPropagatingSenderTracingObservationHandler;
import reactor.netty.observability.ReactorNettyTracingObservationHandler;
import zipkin2.reporter.brave.AsyncZipkinSpanHandler;
import zipkin2.reporter.urlconnection.URLConnectionSender;
import static reactor.netty.Metrics.OBSERVATION_REGISTRY;
public class Application {
public static void main(String[] args) {
init(); (1)
HttpClient client =
HttpClient.create()
.metrics(true, s -> {
if (s.startsWith("/stream/")) { (2)
return "/stream/{n}";
}
return s;
}); (3)
client.get()
.uri("https://httpbin.org/stream/3")
.responseContent()
.blockLast();
}
/**
* This setup is based on
* <a href="https://micrometer.io/docs/tracing#_micrometer_tracing_brave_setup">Micrometer Tracing Brave Setup</a>.
*/
static void init() {
AsyncZipkinSpanHandler spanHandler = AsyncZipkinSpanHandler
.create(URLConnectionSender.create("http://localhost:9411/api/v2/spans"));
StrictCurrentTraceContext braveCurrentTraceContext = StrictCurrentTraceContext.create();
CurrentTraceContext bridgeContext = new BraveCurrentTraceContext(braveCurrentTraceContext);
Tracing tracing =
Tracing.newBuilder()
.currentTraceContext(braveCurrentTraceContext)
.supportsJoin(false)
.traceId128Bit(true)
.sampler(Sampler.ALWAYS_SAMPLE)
.addSpanHandler(spanHandler)
.localServiceName("reactor-netty-examples")
.build();
brave.Tracer braveTracer = tracing.tracer();
Tracer tracer = new BraveTracer(braveTracer, bridgeContext, new BraveBaggageManager());
Propagator propagator = new BravePropagator(tracing);
OBSERVATION_REGISTRY.observationConfig()
.observationHandler(new ReactorNettyPropagatingSenderTracingObservationHandler(tracer, propagator))
.observationHandler(new ReactorNettyTracingObservationHandler(tracer));
}
}
1 | Initializes Brave, Zipkin, and the Observation registry. |
2 | Templated URIs are used as an URI tag value when possible. |
3 | Enables the built-in integration with Micrometer. |
The result in Zipkin
looks like:
14.1. Access Current Observation
Project Micrometer provides a library
that assists with context propagation across
different types of context mechanisms such as ThreadLocal
, Reactor Context
and others.
The following example shows how to use this library in a custom ChannelHandler
:
import brave.Tracing;
import brave.propagation.StrictCurrentTraceContext;
import brave.sampler.Sampler;
import io.micrometer.context.ContextSnapshot;
import io.micrometer.context.ContextSnapshotFactory;
import io.micrometer.tracing.CurrentTraceContext;
import io.micrometer.tracing.Tracer;
import io.micrometer.tracing.brave.bridge.BraveBaggageManager;
import io.micrometer.tracing.brave.bridge.BraveCurrentTraceContext;
import io.micrometer.tracing.brave.bridge.BravePropagator;
import io.micrometer.tracing.brave.bridge.BraveTracer;
import io.micrometer.tracing.propagation.Propagator;
import io.netty.channel.ChannelHandler;
import io.netty.channel.ChannelHandlerContext;
import io.netty.channel.ChannelOutboundHandlerAdapter;
import io.netty.channel.ChannelPromise;
import reactor.netty.NettyPipeline;
import reactor.netty.http.client.HttpClient;
import reactor.netty.http.observability.ReactorNettyPropagatingSenderTracingObservationHandler;
import reactor.netty.observability.ReactorNettyTracingObservationHandler;
import zipkin2.reporter.brave.AsyncZipkinSpanHandler;
import zipkin2.reporter.urlconnection.URLConnectionSender;
import static reactor.netty.Metrics.OBSERVATION_REGISTRY;
public class Application {
public static void main(String[] args) {
init(); (1)
HttpClient client =
HttpClient.create()
.metrics(true, s -> {
if (s.startsWith("/stream/")) { (2)
return "/stream/{n}";
}
return s;
}) (3)
.doOnConnected(conn -> conn.channel().pipeline().addAfter(NettyPipeline.HttpCodec,
"custom-channel-handler", CustomChannelOutboundHandler.INSTANCE)); (4)
client.get()
.uri("https://httpbin.org/stream/3")
.responseContent()
.blockLast();
}
static final class CustomChannelOutboundHandler extends ChannelOutboundHandlerAdapter {
static final ChannelHandler INSTANCE = new CustomChannelOutboundHandler();
@Override
public boolean isSharable() {
return true;
}
@Override
public void write(ChannelHandlerContext ctx, Object msg, ChannelPromise promise) {
try (ContextSnapshot.Scope scope = ContextSnapshotFactory.builder().build().setThreadLocalsFrom(ctx.channel())) {
System.out.println("Current Observation in Scope: " + OBSERVATION_REGISTRY.getCurrentObservation());
//"FutureReturnValueIgnored" this is deliberate
ctx.write(msg, promise);
}
System.out.println("Current Observation: " + OBSERVATION_REGISTRY.getCurrentObservation());
}
}
1 | Initializes Brave, Zipkin, and the Observation registry. |
2 | Templated URIs are used as an URI tag value when possible. |
3 | Enables the built-in integration with Micrometer. |
4 | Custom ChannelHandler that uses context propagation library. This concrete example overrides only
ChannelOutboundHandlerAdapter#write , if it is needed, the same logic can be used for the rest of the methods.
Also, this concrete example sets all ThreadLocal values for which there is a value in the given Channel ,
if another behaviour is needed please check context propagation library API .
For example, you may want to set only some of the ThreadLocal values. |
When you enable Reactor Netty tracing within a framework, you may need to let Reactor Netty use the ObservationRegistry created by this framework.
For this purpose you need to invoke reactor.netty.Metrics#observationRegistry .
You may also need to configure the Reactor Netty ObservationHandlers using the API provided by the framework.
|
15. Unix Domain Sockets
The HTTP
client supports Unix Domain Sockets (UDS) when native transport is in use.
The following example shows how to use UDS support:
import io.netty.channel.unix.DomainSocketAddress;
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.remoteAddress(() -> new DomainSocketAddress("/tmp/test.sock")); (1)
client.get()
.uri("/")
.response()
.block();
}
}
1 | Specifies DomainSocketAddress that will be used |
16. Host Name Resolution
By default, the HttpClient
uses Netty’s domain name lookup mechanism that resolves a domain name asynchronously.
This is as an alternative of the JVM’s built-in blocking resolver.
When you need to change the default settings, you can configure the HttpClient
as follows:
import reactor.netty.http.client.HttpClient;
import java.time.Duration;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.resolver(spec -> spec.queryTimeout(Duration.ofMillis(500))); (1)
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
}
}
1 | The timeout of each DNS query performed by this resolver will be 500ms. |
The following listing shows the available configurations.
Additionally, TCP fallback
is enabled by default.
Configuration name | Description |
---|---|
|
The supplier of the local address to bind to. |
|
The max time to live of the cached DNS resource records (resolution: seconds).
If the time to live of the DNS resource record returned by the DNS server is greater
than this max time to live, this resolver ignores the time to live from
the DNS server and uses this max time to live.
Default to |
|
The min time to live of the cached DNS resource records (resolution: seconds). If the time to live of the DNS resource record returned by the DNS server is less than this min time to live, this resolver ignores the time to live from the DNS server and uses this min time to live. Default: 0. |
|
The time to live of the cache for the failed DNS queries (resolution: seconds). Default: 0. |
|
When this setting is enabled, the resolver notifies as soon as all queries for the preferred address type are complete.
When this setting is disabled, the resolver notifies when all possible address types are complete.
This configuration is applicable for |
|
Disables the automatic inclusion of an optional record that tries to give a hint to the remote DNS server about how much data the resolver can read per response. By default, this setting is enabled. |
|
Specifies whether this resolver has to send a DNS query with the recursion desired (RD) flag set. By default, this setting is enabled. |
|
Sets a custom function to create a |
|
Sets a custom |
|
Sets the capacity of the datagram packet buffer (in bytes). Default: 4096. |
|
Sets the maximum allowed number of DNS queries to send when resolving a host name. Default: 16. |
|
Sets the number of dots that must appear in a name before an initial absolute query is made. Default: -1 (to determine the value from the OS on Unix or use a value of 1 otherwise). |
|
Sets the timeout of each DNS query performed by this resolver (resolution: milliseconds). Default: 5000. |
|
The cache to use to store resolved DNS entries. |
|
The list of the protocol families of the resolved address. |
|
Specifies whether this resolver will also fallback to TCP if a timeout is detected. By default, the resolver will only try to use TCP if the response is marked as truncated. |
|
Enables an
|
|
Performs the communication with the DNS servers on the given
|
|
The list of search domains of the resolver. By default, the effective search domain list is populated by using the system DNS search domains. |
|
A specific logger and log level to be used by this resolver when generating detailed trace information in case of resolution failure. |
Sometimes, you may want to switch to the JVM built-in resolver. To do so, you can configure the HttpClient
as follows:
import io.netty.resolver.DefaultAddressResolverGroup;
import reactor.netty.http.client.HttpClient;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.resolver(DefaultAddressResolverGroup.INSTANCE); (1)
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
}
}
1 | Sets the JVM built-in resolver. |
17. Timeout Configuration
This section describes various timeout configuration options that can be used in HttpClient
.
Configuring a proper timeout may improve or solve issues in the communication process.
The configuration options can be grouped as follows:
17.1. Connection Pool Timeout
By default, HttpClient
uses a connection pool. When a request is completed successfully and if the connection is not scheduled for closing,
the connection is returned to the connection pool and can thus be reused for processing another request. The connection may
be reused immediately for another request or may stay idle in the connection pool for some time.
The following list describes the available timeout configuration options:
-
maxIdleTime
- The maximum time (resolution: ms) that this connection stays idle in the connection pool. By default,maxIdleTime
is not specified.
When you configure maxIdleTime , you should consider the idle timeout configuration on the target server.
Choose a configuration that is equal to or less than the one on the target server. By doing so, you can reduce the I/O
issues caused by a connection closed by the target server.
|
-
maxLifeTime
- The maximum time (resolution: ms) that this connection stays alive. By default,maxLifeTime
is not specified. -
pendingAcquireTimeout
- The maximum time (resolution: ms) after which a pending acquire operation must complete, or aPoolAcquireTimeoutException
is thrown. Default: 45s.
By default, these timeouts are checked on connection release
or acquire
operations and, if some timeout is reached, the connection is closed and removed from the connection pool.
However, you can also configure the connection pool, by setting evictInBackground
, to perform periodic checks on connections.
To customize the default settings, you can configure HttpClient
as follows:
import reactor.netty.http.client.HttpClient;
import reactor.netty.resources.ConnectionProvider;
import java.time.Duration;
public class Application {
public static void main(String[] args) {
ConnectionProvider provider =
ConnectionProvider.builder("custom")
.maxConnections(50)
.maxIdleTime(Duration.ofSeconds(20)) (1)
.maxLifeTime(Duration.ofSeconds(60)) (2)
.pendingAcquireTimeout(Duration.ofSeconds(60)) (3)
.evictInBackground(Duration.ofSeconds(120)) (4)
.build();
HttpClient client = HttpClient.create(provider);
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
provider.disposeLater()
.block();
}
}
1 | Configures the maximum time for a connection to stay idle to 20 seconds. |
2 | Configures the maximum time for a connection to stay alive to 60 seconds. |
3 | Configures the maximum time for the pending acquire operation to 60 seconds. |
4 | Every two minutes, the connection pool is regularly checked for connections that are applicable for removal. |
17.2. HttpClient Timeout
This section provides information for the various timeout configuration options at the HttpClient
level.
Reactor Netty uses Reactor Core as its Reactive Streams implementation, and you may want to use the timeout operator that Mono and Flux provide.
Keep in mind, however, that it is better to use the more specific timeout configuration options available in Reactor Netty, since they provide more control for a specific purpose and use case.
By contrast, the timeout operator can only apply to the operation as a whole, from establishing the connection to the remote peer to receiving the response.
|
17.2.1. Response Timeout
HttpClient
provides an API for configuring a default response timeout for all requests. You can change this default response timeout
through an API for a specific request. By default,
responseTimeout
is not specified.
It is always a good practice to configure a response timeout. |
To customize the default settings, you can configure HttpClient
as follows:
import reactor.core.publisher.Mono;
import reactor.netty.http.client.HttpClient;
import java.time.Duration;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.responseTimeout(Duration.ofSeconds(1)); (1)
String response1 =
client.post()
.uri("https://example.com/")
.send((req, out) -> {
req.responseTimeout(Duration.ofSeconds(2)); (2)
return out.sendString(Mono.just("body1"));
})
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response1);
String response2 =
client.post()
.uri("https://example.com/")
.send((req, out) -> out.sendString(Mono.just("body2")))
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response2);
}
}
1 | Configures the default response timeout to 1 second. |
2 | Configures a response timeout for a specific request to 2 seconds. |
17.2.2. Connection Timeout
The following listing shows all available connection timeout configuration options, but some of them may apply only to a specific transport.
-
CONNECT_TIMEOUT_MILLIS
- If the connection establishment attempt to the remote peer does not finish within the configured connect timeout (resolution: ms), the connection establishment attempt fails. Default: 30s. -
SO_KEEPALIVE
- When the connection stays idle for some time (the time is implementation dependent, but the default is typically two hours), TCP automatically sends akeepalive
probe to the remote peer. By default,SO_KEEPALIVE
is not enabled. When you run withEpoll
/NIO
(since Java 11 on Mac or Linux) transport, you may also configure:-
TCP_KEEPIDLE
- The maximum time (resolution: seconds) that this connection stays idle before TCP starts sendingkeepalive
probes, ifSO_KEEPALIVE
has been set. The maximum time is implementation dependent, but the default is typically two hours. -
TCP_KEEPINTVL
(Epoll)/TCP_KEEPINTERVAL
(NIO) - The time (resolution: seconds) between individualkeepalive
probes. -
TCP_KEEPCNT
(Epoll)/TCP_KEEPCOUNT
(NIO) - The maximum number ofkeepalive
probes TCP should send before dropping the connection.
-
Sometimes, between the client and the server, you may have a network component that silently drops the idle connections without sending a response.
From the Reactor Netty point of view, in this use case, the remote peer just does not respond.
To be able to handle such a use case you may consider configuring
SO_KEEPALIVE .
|
To customize the default settings, you can configure HttpClient
as follows:
import io.netty.channel.ChannelOption;
import io.netty.channel.epoll.EpollChannelOption;
//import io.netty.channel.socket.nio.NioChannelOption;
//import jdk.net.ExtendedSocketOptions;
import reactor.netty.http.client.HttpClient;
import java.net.InetSocketAddress;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.bindAddress(() -> new InetSocketAddress("host", 1234))
.option(ChannelOption.CONNECT_TIMEOUT_MILLIS, 10000) (1)
.option(ChannelOption.SO_KEEPALIVE, true) (2)
// The options below are available only when NIO transport (Java 11) is used
// on Mac or Linux (Java does not currently support these extended options on Windows)
// https://bugs.openjdk.java.net/browse/JDK-8194298
//.option(NioChannelOption.of(ExtendedSocketOptions.TCP_KEEPIDLE), 300)
//.option(NioChannelOption.of(ExtendedSocketOptions.TCP_KEEPINTERVAL), 60)
//.option(NioChannelOption.of(ExtendedSocketOptions.TCP_KEEPCOUNT), 8);
// The options below are available only when Epoll transport is used
.option(EpollChannelOption.TCP_KEEPIDLE, 300) (3)
.option(EpollChannelOption.TCP_KEEPINTVL, 60) (4)
.option(EpollChannelOption.TCP_KEEPCNT, 8); (5)
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
}
}
1 | Configures the connection establishment timeout to 10 seconds. |
2 | Enables TCP keepalive . This means that TCP starts sending keepalive probes when a connection is idle for some time. |
3 | The connection needs to remain idle for 5 minutes before TCP starts sending keepalive probes. |
4 | Configures the time between individual keepalive probes to 1 minute. |
5 | Configures the maximum number of TCP keepalive probes to 8. |
17.2.3. SSL/TLS Timeout
HttpClient
supports the SSL/TLS functionality provided by Netty.
The following list describes the available timeout configuration options:
-
handshakeTimeout
- Use this option to configure the SSL handshake timeout (resolution: ms). Default: 10s.
You should consider increasing the SSL handshake timeout when expecting slow network connections. |
-
closeNotifyFlushTimeout
- Use this option to configure the SSLclose_notify
flush timeout (resolution: ms). Default: 3s. -
closeNotifyReadTimeout
- Use this option to configure the SSLclose_notify
read timeout (resolution: ms). Default: 0s.
To customize the default settings, you can configure HttpClient
as follows:
import reactor.netty.http.Http11SslContextSpec;
import reactor.netty.http.client.HttpClient;
import java.time.Duration;
public class Application {
public static void main(String[] args) {
Http11SslContextSpec http11SslContextSpec = Http11SslContextSpec.forClient();
HttpClient client =
HttpClient.create()
.secure(spec -> spec.sslContext(http11SslContextSpec)
.handshakeTimeout(Duration.ofSeconds(30)) (1)
.closeNotifyFlushTimeout(Duration.ofSeconds(10)) (2)
.closeNotifyReadTimeout(Duration.ofSeconds(10))); (3)
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
}
}
1 | Configures the SSL handshake timeout to 30 seconds. |
2 | Configures the SSL close_notify flush timeout to 10 seconds. |
3 | Configures the SSL close_notify read timeout to 10 seconds. |
17.2.4. Proxy Timeout
HttpClient
supports the proxy functionality provided by Netty and provides a way to specify the
connection establishment timeout.
If the connection establishment attempt to the remote peer does not finish within the timeout,
the connection establishment attempt fails. Default: 10s.
To customize the default settings, you can configure HttpClient
as follows:
import reactor.netty.http.client.HttpClient;
import reactor.netty.transport.ProxyProvider;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.proxy(spec -> spec.type(ProxyProvider.Proxy.HTTP)
.host("proxy")
.port(8080)
.nonProxyHosts("localhost")
.connectTimeoutMillis(20_000)); (1)
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
}
}
1 | Configures the connection establishment timeout to 20 seconds. |
17.2.5. Host Name Resolution Timeout
By default, the HttpClient
uses Netty’s domain name lookup mechanism to resolve a domain name asynchronously.
The following list describes the available timeout configuration options:
-
cacheMaxTimeToLive
- The maximum time to live of the cached DNS resource records (resolution: seconds). If the time to live of the DNS resource record returned by the DNS server is greater than this maximum time to live, this resolver ignores the time to live from the DNS server and uses this maximum time to live. Default:Integer.MAX_VALUE
. -
cacheMinTimeToLive
- The minimum time to live of the cached DNS resource records (resolution: seconds). If the time to live of the DNS resource record returned by the DNS server is less than this minimum time to live, this resolver ignores the time to live from the DNS server and uses this minimum time to live. Default: 0s. -
cacheNegativeTimeToLive
- The time to live of the cache for the failed DNS queries (resolution: seconds). Default: 0s. -
queryTimeout
- Sets the timeout of each DNS query performed by this resolver (resolution: milliseconds). Default: 5s.
To customize the default settings, you can configure HttpClient
as follows:
import reactor.netty.http.client.HttpClient;
import java.time.Duration;
public class Application {
public static void main(String[] args) {
HttpClient client =
HttpClient.create()
.resolver(spec -> spec.queryTimeout(Duration.ofMillis(500))); (1)
String response =
client.get()
.uri("https://example.com/")
.responseContent()
.aggregate()
.asString()
.block();
System.out.println("Response " + response);
}
}
1 | The timeout of each DNS query performed by this resolver will be 500ms. |