public final class RetryBackoffSpec extends Retry
Retry strategy based on exponential backoffs, with configurable features. Use Retry.backoff(long, Duration)
to obtain a preconfigured instance to start with.
Retry delays are randomized with a user-provided jitter(double) factor between 0.d (no jitter)
and 1.0 (default is 0.5).
Even with the jitter, the effective backoff delay cannot be less than minBackoff(Duration)
nor more than maxBackoff(Duration). The delays and subsequent attempts are executed on the
provided backoff scheduler(Scheduler). Alternatively, Retry.fixedDelay(long, Duration) provides
a strategy where the min and max backoffs are the same and jitters are deactivated.
Only errors that match the filter(Predicate) are retried (by default all),
and the number of attempts can also limited with maxAttempts(long).
When the maximum attempt of retries is reached, a runtime exception is propagated downstream which
can be pinpointed with Exceptions.isRetryExhausted(Throwable). The cause of
the last attempt's failure is attached as said retryExhausted
exception's cause. This can be customized with onRetryExhaustedThrow(BiFunction).
Additionally, to help dealing with bursts of transient errors in a long-lived Flux as if each burst
had its own backoff, one can choose to set transientErrors(boolean) to true.
The comparison to maxAttempts(long) will then be done with the number of subsequent attempts
that failed without an onNext in between.
The RetryBackoffSpec is copy-on-write and as such can be stored as a "template" and further configured
by different components without a risk of modifying the original configuration.
Retry.RetrySignal| Modifier and Type | Field and Description |
|---|---|
Supplier<Scheduler> |
backoffSchedulerSupplier
|
Predicate<Throwable> |
errorFilter
The configured
Predicate to filter which exceptions to retry. |
boolean |
isTransientErrors
The configured transient error handling flag.
|
double |
jitterFactor
The configured jitter factor, as a
double. |
long |
maxAttempts
The configured maximum for retry attempts.
|
Duration |
maxBackoff
The configured maximum backoff
Duration. |
Duration |
minBackoff
The configured minimum backoff
Duration. |
retryContext| Modifier and Type | Method and Description |
|---|---|
RetryBackoffSpec |
doAfterRetry(Consumer<Retry.RetrySignal> doAfterRetry)
Add synchronous behavior to be executed after the retry trigger is emitted in
the companion publisher.
|
RetryBackoffSpec |
doAfterRetryAsync(Function<Retry.RetrySignal,Mono<Void>> doAsyncAfterRetry)
Add asynchronous behavior to be executed after the current retry trigger in the companion publisher,
thus delaying the resulting retry trigger with the additional
Mono. |
RetryBackoffSpec |
doBeforeRetry(Consumer<Retry.RetrySignal> doBeforeRetry)
Add synchronous behavior to be executed before the retry trigger is emitted in
the companion publisher.
|
RetryBackoffSpec |
doBeforeRetryAsync(Function<Retry.RetrySignal,Mono<Void>> doAsyncBeforeRetry)
Add asynchronous behavior to be executed before the current retry trigger in the companion publisher,
thus delaying the resulting retry trigger with the additional
Mono. |
RetryBackoffSpec |
filter(Predicate<? super Throwable> errorFilter)
Set the
Predicate that will filter which errors can be retried. |
Flux<Long> |
generateCompanion(Flux<Retry.RetrySignal> t)
The intent of the functional
Retry class is to let users configure how to react to Retry.RetrySignal
by providing the operator with a companion publisher. |
RetryBackoffSpec |
jitter(double jitterFactor)
Set a jitter factor for exponential backoffs that adds randomness to each backoff.
|
RetryBackoffSpec |
maxAttempts(long maxAttempts)
Set the maximum number of retry attempts allowed.
|
RetryBackoffSpec |
maxBackoff(Duration maxBackoff)
Set a hard maximum
Duration for exponential backoffs. |
RetryBackoffSpec |
minBackoff(Duration minBackoff)
Set the minimum
Duration for the first backoff. |
RetryBackoffSpec |
modifyErrorFilter(Function<Predicate<Throwable>,Predicate<? super Throwable>> predicateAdjuster)
|
RetryBackoffSpec |
onRetryExhaustedThrow(BiFunction<RetryBackoffSpec,Retry.RetrySignal,Throwable> retryExhaustedGenerator)
Set the generator for the
Exception to be propagated when the maximum amount of retries
is exhausted. |
RetryBackoffSpec |
scheduler(Scheduler backoffScheduler)
Set a
Scheduler on which to execute the delays computed by the exponential backoff
strategy. |
RetryBackoffSpec |
transientErrors(boolean isTransientErrors)
Set the transient error mode, indicating that the strategy being built should use
Retry.RetrySignal.totalRetriesInARow() rather than
Retry.RetrySignal.totalRetries(). |
protected void |
validateArguments() |
RetryBackoffSpec |
withRetryContext(ContextView retryContext)
Set the user provided
context that can be used to manipulate state on retries. |
backoff, fixedDelay, from, indefinitely, max, maxInARow, retryContext, withThrowablepublic final Duration minBackoff
Duration.minBackoff(Duration)public final Duration maxBackoff
Duration.maxBackoff(Duration)public final double jitterFactor
double.jitter(double)public final Supplier<Scheduler> backoffSchedulerSupplier
scheduler(Scheduler)public final long maxAttempts
maxAttempts(long)public final Predicate<Throwable> errorFilter
Predicate to filter which exceptions to retry.filter(Predicate),
modifyErrorFilter(Function)public final boolean isTransientErrors
transientErrors(boolean)public RetryBackoffSpec withRetryContext(ContextView retryContext)
context that can be used to manipulate state on retries.retryContext - a new snapshot of user provided dataRetryBackoffSpec which can either be further configured or used as Retrypublic RetryBackoffSpec maxAttempts(long maxAttempts)
maxAttempts - the new retry attempt limitRetryBackoffSpec which can either be further configured or used as Retrypublic RetryBackoffSpec filter(Predicate<? super Throwable> errorFilter)
Predicate that will filter which errors can be retried. Exceptions
that don't pass the predicate will be propagated downstream and terminate the retry
sequence. Defaults to allowing retries for all exceptions.errorFilter - the predicate to filter which exceptions can be retriedRetryBackoffSpec which can either be further configured or used as Retrypublic RetryBackoffSpec modifyErrorFilter(Function<Predicate<Throwable>,Predicate<? super Throwable>> predicateAdjuster)
set Predicate with
a new condition to allow retries of some exception or not. This can typically be used with
Predicate.and(Predicate) to combine existing predicate(s) with a new one.
For example:
//given
RetrySpec retryTwiceIllegalArgument = Retry.max(2)
.filter(e -> e instanceof IllegalArgumentException);
RetrySpec retryTwiceIllegalArgWithCause = retryTwiceIllegalArgument.modifyErrorFilter(old ->
old.and(e -> e.getCause() != null));
predicateAdjuster - a Function that returns a new Predicate given the
currently in place Predicate (usually deriving from the old predicate).RetryBackoffSpec which can either be further configured or used as Retrypublic RetryBackoffSpec doBeforeRetry(Consumer<Retry.RetrySignal> doBeforeRetry)
doBeforeRetry - the synchronous hook to execute before retry trigger is emittedRetryBackoffSpec which can either be further configured or used as RetryandDelayRetryWith for an asynchronous versionpublic RetryBackoffSpec doAfterRetry(Consumer<Retry.RetrySignal> doAfterRetry)
doAfterRetry - the synchronous hook to execute after retry trigger is startedRetryBackoffSpec which can either be further configured or used as RetryandRetryThen for an asynchronous versionpublic RetryBackoffSpec doBeforeRetryAsync(Function<Retry.RetrySignal,Mono<Void>> doAsyncBeforeRetry)
Mono.doAsyncBeforeRetry - the asynchronous hook to execute before original retry trigger is emittedRetryBackoffSpec which can either be further configured or used as Retrypublic RetryBackoffSpec doAfterRetryAsync(Function<Retry.RetrySignal,Mono<Void>> doAsyncAfterRetry)
Mono.doAsyncAfterRetry - the asynchronous hook to execute after original retry trigger is emittedRetryBackoffSpec which can either be further configured or used as Retrypublic RetryBackoffSpec onRetryExhaustedThrow(BiFunction<RetryBackoffSpec,Retry.RetrySignal,Throwable> retryExhaustedGenerator)
Exception to be propagated when the maximum amount of retries
is exhausted. By default, throws an Exceptions.retryExhausted(String, Throwable) with the
message reflecting the total attempt index, transient attempt index and maximum retry count.
The cause of the last Retry.RetrySignal is also added
as the exception's cause.retryExhaustedGenerator - the Function that generates the Throwable for the last
Retry.RetrySignalRetryBackoffSpec which can either be further
configured or used as Retrypublic RetryBackoffSpec transientErrors(boolean isTransientErrors)
Retry.RetrySignal.totalRetriesInARow() rather than
Retry.RetrySignal.totalRetries().
Transient errors are errors that could occur in bursts but are then recovered from by
a retry (with one or more onNext signals) before another error occurs.
For a backoff based retry, the backoff is also computed based on the index within
the burst, meaning the next error after a recovery will be retried with a minBackoff(Duration) delay.
isTransientErrors - true to activate transient modeRetryBackoffSpec which can either be further configured or used as Retrypublic RetryBackoffSpec minBackoff(Duration minBackoff)
Duration for the first backoff. This method switches to an
exponential backoff strategy if not already done so. Defaults to Duration.ZERO
when the strategy was initially not a backoff one.minBackoff - the minimum backoff DurationRetryBackoffSpec which can either be further configured or used as Retrypublic RetryBackoffSpec maxBackoff(Duration maxBackoff)
Duration for exponential backoffs. This method switches
to an exponential backoff strategy with a zero minimum backoff if not already a backoff
strategy. Defaults to Duration.ofMillis(Long.MAX_VALUE).maxBackoff - the maximum backoff DurationRetryBackoffSpec which can either be further configured or used as Retrypublic RetryBackoffSpec jitter(double jitterFactor)
0.5 (a jitter of at most 50% of the computed delay).jitterFactor - the new jitter factor as a double between 0d and 1dRetryBackoffSpec which can either be further configured or used as Retrypublic RetryBackoffSpec scheduler(@Nullable Scheduler backoffScheduler)
Scheduler on which to execute the delays computed by the exponential backoff
strategy. Defaults to a deferred resolution of the current Schedulers.parallel() (use
null to reset to this default).backoffScheduler - the Scheduler to use, or null to revert to the defaultRetryBackoffSpec which can either be further configured or used as Retryprotected void validateArguments()
public Flux<Long> generateCompanion(Flux<Retry.RetrySignal> t)
RetryRetry class is to let users configure how to react to Retry.RetrySignal
by providing the operator with a companion publisher. Any onNext
emitted by this publisher will trigger a retry, but if that emission is delayed compared to the original signal then
the attempt is delayed as well. This method generates the companion, out of a Flux of Retry.RetrySignal,
which itself can serve as the simplest form of retry companion (indefinitely and immediately retry on any error).generateCompanion in class Retryt - the original Flux of Retry.RetrySignal, notifying of each source error that
might result in a retry attempt, with context around the error and current retry cycle.